ucmptest譯文
2020/4/20 9:48:03點擊:
ucmptest譯文
UCM-EN Check Menu M - 1 - 4 - 1
UCM-EN 測試菜單This function allows to perform the handover test for Unintended Car Movement Protection
according to EN81-1.
這個菜單用來測試轎廂意外運行保護功能(根據 EN81-1)。
For the Handover Test procedure, the safety chain is interrupted by a specially designed
test plug which is located between the DS and the GS contacts.
在測試過程中,安全回路會被位于廳門門鎖觸點與轎門門鎖觸點之間的特殊測試插頭斷開。
After the plug has been removed and a key has been pushed, the car performs a special
run with closed the doors and the door bypass is bridged. This special run will use a defined
profile to simulate free fall.
當拔下測試插頭并按下服務器相應按鍵,轎廂會關門執行特殊的運行,并且門旁路會接通,
轎廂會按照預定的曲線模擬自由下落。
When the car leaves the doorzone, the door bypass circuit interrupts the safety chain and
causes an emergency stop.
當轎廂離開門區,門旁路會斷開,引起急停。
After the test, the displacement of the car must be manually measured by the mechanic.
測試之后,轎廂位移需要手動測量。
The Service Tool guides the mechanic through the steps of the handover procedure.
服務器會一步步引導測試者完成測試。
- 上一篇:XAA174BQL1 2020/4/20
- 下一篇:TT使用手冊MCS-TCBC 2020/4/20